Special Price Safco Products 6267 Commercial Shelf Kit 36″W x 24″D x 72″H with 5 Shelves, Gray By Safco Products
Safco Products 6267 Commercial Shelf Kit 36″W x 24″D x 72″H with 5 Shelves, Gray
Commercial Shelving Unit 36″W x 24″D x 75″H with box beam shelf design and double-sided compression clips support loads up to 650 lbs. per shelf, evenly loaded. Unit includes 4 posts and cross braces. Shelves can be easily repositioned in one-inch increments. Shelves feature corner brackets which help prevent rocking and improve overall stability and rigidity. A hat channel under every shelf increases overall strength. Steel construction with durable powder coat finish.
If you’re looking for top recommended Safco Products 6267 Commercial Shelf Kit 36″W x 24″D x 72″H with 5 Shelves, Gray, then Safco Products 6267 Commercial Shelf Kit 36″W x 24″D x 72″H with 5 Shelves, Gray is our suggestion. Many good reviews already proving the quality of this product. The Safco Products 6267 Commercial Shelf Kit 36″W x 24″D x 72″H with 5 Shelves, Gray completed with a lot of capabilities which makes it great product. If you wish to know further of this location finding tools, just read its main features below.
The Safco Products 6267 Commercial Shelf Kit 36″W x 24″D x 72″H with 5 Shelves, Gray Details
- Amazon Sales Rank: #71202 in Office Product
- Size: 36 x 24″
- Color: Gray
- Brand: Safco Products
- Model: 6267
- Published on: 2012-01-01
- Number of items: 1
- Dimensions: 75.00″ h x 36.00″ w x 24.00″ l, 45.00 pounds
- Commercial 36 x 24″ steel 5 shelf unit
- Box beam design with double-sided compression clips
- Five steel shelves that adjust in 1″ increments, weight capacity 650 lbs. evenly distributed
- Corner brackets and hat channel
- Steel construction with durable powder coat finish
If this is a MUST HAVE product, be sure order now to avoid disappointment. Get The best cheapest price on the web we have searched and get the Safco Products 6267 Commercial Shelf Kit 36″W x 24″D x 72″H with 5 Shelves, Gray rihgt now
This is The Best Selling Safco Products 6267 Commercial Shelf Kit 36″W x 24″D x 72″H with 5 Shelves, Gray By Safco Products tends to SELL OUT VERY FAST!! Buyers Review About Safco Products 6267 Commercial Shelf Kit 36″W x 24″D x 72″H with 5 Shelves, Gray By Safco Products
Most helpful customer reviews
5 of 5 people found the following review helpful.
How to put it together
Putting this thing together can be a chore.
Here is the easiest and BEST method.
The CRITICAL point to realize is that this shelf unit can be put together in a way that is not Square or out of square.
If you do not make it square, you will have serious problems putting in shelves, serious enough that the shelves will not mount.
If your configuration requires that a shelf be placed at a height that aligns with ANY of the “X” brace screws you MUST place the screw head on the inside of the rail and nut on the outside otherwise the shelf with Not sit on its mounts, it will sit on a screw nut.
(sitting on the nut can and will cause shelf failure, not enough contact surface area)
Measure where you will put your shelves first and see if it aligns near a brace screw.
I used a carpenters square and corner clamps to put my shelf together.
The corner clamps helped immensely but are not required.
Search Amazon for:
Drillpro Angle Clamp Corner Clamp for Wood Working or Metal Right Angle Frame Vice Welding Woodworking
These are not the exact same model I used but should work the same.
One part of clamp on the rail, other part on a shelf temporarily placed in the middle.
This “holds” square as the screws are tightened. (just like having a second person with a carpenters square)
A very good $13 investment.
BEST tools for the job.
1/4″ drive Ratchet and 10mm socket.
(BE WARNED you can use a 10mm wrench but keep in mind, the nut needs to be tightened not the screw head, the screw head is low grade metal and will not get tight enough without damaging itself, the screw head should only be used to hold the screw while the nut is tightened)
Either a Philips or Large slotted screwdriver.
A 2 foot carpenters square. (smaller also works)
Corner clamps at least 2.(extremely helpful)
A pair of pliers may also be required to straighten some metal shelf corners. (shipping handling damage)
Place 2 rails on the floor.
Place the “L” corner braces INSIDE the rails between the shelf and rail.
Mount the bottom shelf and DO NOT tighten the screws. (there are 2 shelves dedicated to either top or bottom identified by 2 holes on the corners)
Mount the top shelf in the same manner and DO NOT tighten the screws.
Place the remaining 2 rails on top of the now loosely mounted top and bottom shelves.
Mount the 2 rails to the top and bottom shelf and DO NOT tighten the screws.
Mount the shorter Side Brace bars and DO NOT tighten the screws. (show as an “X” on the sides)
Now stand the shelf unit upright. (it will be wobbly)
Mount the back brace bars and DO NOT tighten the screws.
Take your carpenters square and begin squaring up all rails with respect to bottom shelf.
Tighten the “X” brace screws on side braces and back brace moderately as you verify square.
Tighten the bottom shelf screws slightly on all four corners once again verifying square.
(bottom shelf is a real pain and why the 1/4″ drive ratchet is required, you barely have access under the shelf to tighten the screws)
Once all is square, tighten bottom shelf and brace screws.
Now proceed to tighten the top shelf screws while constantly pushing up so that the shelf is just slightly above the top of the rails.
This is Not going to be be the most enjoyable hour you have ever spent, but the method described minimizes troubles and effort ad allows one person to put this unit together fairly easily. (2 people is much easier but not really faster unless you have two sets of tools)
LAST BUT CERTAINLY NOT LEAST
This is not absolutely required but it can certainly pay off in the future.
Buy some general purpose RTV / Silicone Sealant and carefully squeeze some into the plastic feet before mounting.
SAFCO does Not have or provide any replacement for these plastic feet at all.
If you move these shelves and a plastic foot falls off, you will not find a replacement.
The RTV glues the plastic foot to the rail and prevents it from falling off.
These below are NOT required but make very good sense.
But some 3/16 tooth washers.
These will help assembly drastically. (helps hold nut while tightening)
Buy some 3/16 steel washers.
Search Amazon for:
Hillman Fasteners 270052 0.19 in. Zinc Plated Steel Flat Washer, 100 Pack
Buy some 3/16 steel lock washers.
Search Amazon for:
Imperial 176120 Lock Washer, 3/16″, 18/8-304 Stainless Steel, Pkg/100
4 of 4 people found the following review helpful.
A bookshelf that can actually hold books!
By Keely D
I’ve gone through many a bookshelf from Ikea and the like that just don’t make the cut. Eventually, they all bow under the weight of the very objects they were made to hold. I said enough was enough and bought an industrial steel bookshelf.
It weighs a ton, but will never succumb to the weight of my books that’s for sure.
Also, Safco’s customer service is fantastic. I lost some of the shelving brackets when I moved and I emailed them. Within 24 hours a rep emailed me back asking for the part numbers I needed and sent them to me FOR FREE.
0 of 0 people found the following review helpful.
If you try to assemble bent parts you will not be happy with the results
The packing did not protect the contents. I bought two sets. In each box half the vertical rails were twisted and kinked. Some of the shelves were bent at the corners. It took about as long to straighten out these part as it did to assemble the shelving kits. Do not buy this item if you are not willing and able to perform this correction. If you try to assemble bent parts you will not be happy with the results.
Once fixed and assembled (the shelves took a bunch of coaxing ) you end up with a fairly solid product.
I’ve attached 2 photos of some damaged parts before I fixed them.