Buy Fab Glass and Mirror Trophy Glass Shelf Kit with Chrome Brackets, 8″ L x 8″ W By Fab Glass and Mirror
If you’re looking for top recommended Fab Glass and Mirror Trophy Glass Shelf Kit with Chrome Brackets, 8″ L x 8″ W, then Fab Glass and Mirror Trophy Glass Shelf Kit with Chrome Brackets, 8″ L x 8″ W is our suggestion. Many good reviews already proving the quality of this product. The Fab Glass and Mirror Trophy Glass Shelf Kit with Chrome Brackets, 8″ L x 8″ W completed with a lot of capabilities which makes it great product. If you wish to know further of this location finding tools, just read its main features below.
Fab Glass and Mirror Trophy Glass Shelf Kit with Chrome Brackets, 8″ L x 8″ W
This 8″ X 8″ inch Trophy Glass shelf is quick and simple way to give your home a fresh look and a great makeover is to install a glass shelves. In addition to the nice look it is a great way of having extra space and storage. It can also be used in adding a nice touch of decoration to your home. Thickness & Glass Type: All shelves are 10mm or 3/8 inch thick Tempered Glass. Clear glass: Its a Clear glass, which is processed to be as close to perfect as possible through a curing process yields no air bubbles. Tempered Glass:Tempered (toughened through a process of extreme heating and rapid cooling during manufacturing process) glass is two or more times stronger than annealed (Standard) glass. When broken, it shatters into many small fragments which prevent major injuries. This type of glass is intended for uses requiring superior strength and safety properties while standard glass could pose potential risk of injuries with sharpe edges in case of brakage. Packaging: We make every effort to make sure the glass shelf kit is well protected during shipping process and arrive safely. Each glass shelf kit is individually wrapped with our state of the art packaging techniques and materials, which insures its safe delivery.
The Fab Glass and Mirror Trophy Glass Shelf Kit with Chrome Brackets, 8″ L x 8″ W Details
- Amazon Sales Rank: #1056529 in Home
- Color: Clear
- Brand: Fab Glass and Mirror
- Model: SH-TROP8
- Dimensions: 2.00″ h x 8.00″ w x 8.00″ l, 2.00 pounds
- 8″ X 8″ Square inch Trophy Glass Shelf Kit
- Flat polished edge
- 3/8 inch or 10mm thick glass
- Comes with 2 free Chrome Brackets For Easy Installation
- May use as storage, bathroom, living room shelf etc
If this is a MUST HAVE product, be sure order now to avoid disappointment. Get The best cheapest price on the web we have searched and get the Fab Glass and Mirror Trophy Glass Shelf Kit with Chrome Brackets, 8″ L x 8″ W rihgt now
This is The Best Selling Fab Glass and Mirror Trophy Glass Shelf Kit with Chrome Brackets, 8″ L x 8″ W By Fab Glass and Mirror tends to SELL OUT VERY FAST!! Buyers Comments About Fab Glass and Mirror Trophy Glass Shelf Kit with Chrome Brackets, 8″ L x 8″ W By Fab Glass and Mirror
Most helpful customer reviews
1 of 1 people found the following review helpful.
Fantastic Glass to make 3D Printer Bed for the BoXZY
By Donna W.
While not originally designed for it, this glass works fabulously with the BoXZY 3D printer as a glass bed for printing. It’s very flat and once leveled produces some of the most amazing first-layers I’ve seen (certainly better than printing to kapton covered aluminum). Printing a 0.1mm first layer can be “the norm” rather than “the exception”.
The 8″x8″ size is perfect for the BoXZY and allows full use of all three axis with no limiting of the print area. I do recommend putting an 8″x8″ sheet of kapton tape between the aluminum bed of the BoXZY and this glass to distribute the heat at that junction point, but it’s a perfect fit and clips nicely to the existing aluminum bed with large ACCO Binder Clips, allowing for easy attachment of a silicone bed heater to the back of the original aluminum bed, which works well to heat the glass. Though having this glass attached will increase the time required to heat the bed quite a bit.
This glass is thicker than the glass beds used on many 3D printers and therefore shouldn’t have any of the warping issues often reported on those thinner glasses. Adding the thickness of the glass does require setting the extruder attachment up higher, but it’s not too high to reduce print height.
The attached picture shows the glass in use on the BoXZY printer with a print that had just finished and was in the process of cooling. When cool, the print will literally pop right off the glass, but sticks nicely to the glass when using PVA (aka glue stick) or ABS juice (depending on the material you are printing).
I don’t know how well this glass works as a shelf, but it’s fantastic as a 3D Printer Bed!
0 of 0 people found the following review helpful.
Beautiful shelves and easy to install
By Jennifer Andrews
Quality!!!!!!! Fast delivery. Beautiful shelves and easy to install. We have them in our spa and clients love them! Highly recommend
0 of 0 people found the following review helpful.
By Amazon Customer
Looks great in my fancy new kitchen remodel!